Plano INT - solid interior door

SKU
Plano INT
In stock
£440.00
Overview

The door is made of a wooden rail and stile set topped with two flush HDF boards covered with the LAMISTONE CPL, SILKSTONE surface finish. The wood grain on the rail and stile set is vertical. On panels and cross rails it can be horizontal (W02-W02A, W03-W03A) or vertical (W00, W04).
A single-sided magnetic board (Z) or a single-sided mirror (WLZ) can be attached to the door leaf.

STANDARD EQUIPMENT

  • White/brown/graphite glass, 4 mm thick
  • Single-point mortise lock (rebated system) or magnetic mortise lock (non-rebated system), key-operated, for a cylinder or a bathroom lock
  • Hinges: B type 
  • The door closer is not applicable

SIZE

"60" - 676mm min installation hole width / 786 mm - max installation hole width
"70" - 776mm min installation hole width / 886 mm - max installation hole width
"80" - 876mm min installation hole width / 986 mm - max installation hole width
"90" - 976mm min installation hole width / 1086 mm - max installation hole width

min installation hole height: 2053 mm
max installation hole height: 2112 mm

REQUIRED THICKNESS OF YOUR WALL

min 75 mm
max 300mm

COLOUR:

311 bright oak, 312 limba, 323 rustic oak, 326 beech, 334 european oak, 340 ebony, 404 dark walnut, 405 light walnut, 421 cappucino, 422 mokka, 424 teak

OPENING WAY:

Right hand (RH), Left hand (LH),

ADDITIONAL EQUIPMENT (at an extra charge)

  • Size “100”
  • Non-standard door shortening (maximum door shortening available: up to 60 mm):
  • door shorter by 20 mm (the lower element of the door has a non-standard height)
    door shorter by 30-60 mm (the upper and the lower element of the door has a non-standard height)
  • Door lower by 50 mm
  • Door higher by 50 mm or 100 mm
  • Ventilation trim
-
+
Write Your Own Review
You're reviewing:Plano INT - solid interior door