The door is constructed of a wooden rail and stile set topped with two HDF boards with LAMISTONE, SILKSTONE surface finish. The standard infill is a honeycomb-like layer. The leaf has horizontal wood grain and door frames have vertical wood grain.
STANDARD EQUIPMENT
- single-point (rebated system) or magnetic (non-rebated system) mortise lock, key-operated, for a cylinder or a bathroom lock
- hinges: B type
Standard door leaf size:
60 cm x 200 cm
70 cm x 200 cm
80 cm x 200 cm
90 cm x 200 cm
Required Installation hole width:
60 cm x 200 cm - 676mm min installation hole width / 786 mm - max installation hole width
70 cm x 200 cm - 776mm min installation hole width / 886 mm - max installation hole width
80 cm x 200 cm - 876mm min installation hole width / 986 mm - max installation hole width
90 cm x 200 cm - 976mm min installation hole width / 1086 mm - max installation hole width
Required Installation hole height:
min installation hole height: 2053 mm
max installation hole height: 2112 mm
Required thickness of your wall
min 75 mm
max 300mm
COLOUR:
254 Royal anthracite H, 255 Polish ash tree H, 256 bright nougat V, 267 bleached elm H, 268 sandy elm H, 269 gray elm H
OPENING WAY:
Right hand (RH), Left hand (LH),
ADDITIONAL EQUIPMENT (at an extra charge)
- size „100”
- size „110”
- perforated chipboard infill
- solid chipboard infill
- third hinge in the door leaf or adjustable pivot hinge:
B type, D type, K type, C type, M type for „60”-„80” width
DUO concealed for „60”-„80” width - rail and stile set (allowing the user to shorten the door leaf by max. 50 mm on a do-it-yourself basis)
- rail and stile set (allowing the user to shorten the door leaf by max. 90 mm on a do-it-yourself basis)
- reinforcement for door closer
- bottom rail and stile set protection against excessive moisture impact (not applicable to leaves with ventilation trim)
- non-standard door shortening (max. up to 100 mm)
- door lower by 50 mm or 100 mm
- door higher by 50 mm or 100 mm
- door higher by 150 mm or 200 mm
- ventilation trim