WIS 8 - Walnut garage door made of panels with low ribs

WIS 8 - garage door
In stock

Sectional doors is the most comfortable and convenient solution for your garage. Our doors are warm doors with the coefficient U similar to the one of the multi-chamber windows used for energy saving construction. Panels filled with polyurethane foam produced at our own factory and systems of seals contribute to this low coefficient.

  • Torsion spring system designed for 20,000 cycles
  • Galvanized construction
  • Panel: 40 mm
  • Panel heat transfer coefficient Up=0.48 W/m2 K
  • Sound reduction index: Rc=23 dB
  • Rollers with bearings


40 [mm] thick steel panels with Freon-free polyurethane foam infillrequied mounting dimensions of the garage door:

minimum headroom size230 mm (3 in the picture)
minimum left side size: 110mm (2 in the picture)
minimum right side size: 110mm (2 in the picture)
minimum backroom size: 4000mm (4 in the picture)

Standard hole in the wall:
width from 2250 to 6000
height from:  2100 to 2250

If you have different hole in the wall please contact to us



When in use, sectional and roller doors do not require any free space in front of the garage. The door blade rises vertically and hides under the ceiling or rolls up into a box . Both door types are recommended for garages opening directly onto the street and where there is limited space in front of the garage. leaf rises up and out in front of a building. Therefore, a car cannot be parked directly in front of the door, but at a distance of approximately 1.5 m. If the car is parked closer, the door cannot be opened. , on the other hand, opens like an ordinary door and requires free space in front of the garage allowing free movement of the door leaves. In designing a garage, it should be ensured that the entrance opening size is sufficient to allow comfortable entry for a car. A standard size garage door constitutes an economical solution, and is often available on the spot. If it is not possible to use a standard door in the existing opening, we recommend installing custom-made doors fitted precisely to the existing opening

Form and function

Sectional garage doors by WIŚNIOWSKI are manufactured using 40 mm panel garage doors. All our panels are manufactured in the WIŚNIOWSKI facility using state-of-the-art technological lines which ensure high quality and repeatability at each stage of the manufacturing process. High technical parameters and reliable corrosion protection are obtained thanks to the use of high grade, galvanized steel with paint or film coating. The stiff polyurethane foam core ensures optimum strength for the panels and improves their thermal insulation. Special solutions, such as the 5-layer sheet bending system ensures stable fastening of elements, which further increases the strength of our design.


WIŚNIOWSKI up-and-over doors are safe to use, and certified in accordance with the requirements of European Standard EN 13241-1. The solutions applied in these doors guarantee safety for yourself and your family: an overload switch, photocells, spring casings, the shape of guides and guide rolls with bearings. A two-point, latch-type door bolting system makes certain that the door is locked.

Write Your Own Review
You're reviewing:WIS 8 - Walnut garage door made of panels with low ribs
Your Rating