Side-hinged double-leaf doors are the most cost-effective solution intended for use in single-family housing and utility rooms. Attractive price and reliable operation are guaranteed due to the simple and proven design solutions.
- the frame and leaves are made of galvanized steel profiles
- the door skin is made of galvanized steel sheets T-10 with vertical, horizontal and slanted infill designs
- frame parts are bolted
- door leaf restrictor
- door holder to protect the door leaf against closing
- hinge restrictor to protect the door leaf from dropping down
The door leaf is filled with galvanized, profiled steel sheet - trapezoidal T-10 - in vertical, horizontal or diagonal surface finishes and it is coated with polyester. Both leaves open outward.
The double-leaf gate has a left passive leaf (seen from the outside) blocked to the lintel and threshold. The right active wing is equipped with a lock with an insert and a handle with a black PVC-1 escutcheon (locked to the lintel and threshold), the gate has a symmetrical division of the wings.
FUNCTIONALITY AND SAFETY
Hinge restrictor - protects the door leaf against being forced open.
Door leaf restrictor - controls door leaf motion so as not to let it open too far.
Foot - protects an open door against uncontrolled closing.
Bolted connections - guarantee the durability of the whole structure that is made of galvanized steel sections
Door with thermal insulation - may be added to improve garage’s thermal insulating power
Self-locking latches - installed in four points (at door leaf top and bottom) protect against unauthorized access
Requied hole in the wall:
width from 2000mm to 5000mm
height from: 2000mm to 4000mm